mnsnowboy
Minnesota
Joined: 09/06/2002
View Profile
 Offline
|
ZR900MAN wrote:Only use round aluminum backes. Square one pull through to much and plastic ones just break.
I haven't had a square one pull thru...more square inches on da backside. Don't put any studs on tha outsides of da track, you'll be gettin a new one two weeks later. Kayrist I got bout 5/16" over ta top of tha lug and there's no clearance issue. Pretty sure Frednuts has it...I remember checkin dat out when lining my shizzle up on da 6hundo. Course da track I took off had rub marks in it lol
-sb
Kick ass!
  
|
XC800SP
UAW Local 212
Joined: 12/18/2004
View Profile
Offline
|
I got 196 in my 1 " Hacksaw. 1.080 studboy power points. Inside, outside, and upsidedown. All 196 are still there although I didn't ride it too much last year  Last track (original)had one tear out from the outside and enbedded itself in the snow flap, stayed there for 2 years till the track failed. Square aluminum backers are better than round ones, as long as their installed right. Hookin and bookin with 196 ! C-ya.
1.375"ers for a ripsaw 1.25 track.
|
BadCompany
MI
Joined: 07/26/2005
View Profile
Offline
|
ZR900MAN wrote:Only use round aluminum backes. Square one pull through to much and plastic ones just break.
but the plastic ones look kooler and that's all that really matters
Oldtimer F-7 wrote:Smiles, not miles. 
1983 Honda 200X mods include mice eaten airfilter (kicks withing 5)
1985 Honda 200Xno brakes mod
1996 AC ZRT 600in pieces
2005 Honda 450r Blinged Out
#215 D-14 "The Bull Shiit stops when the gate drops"
|
Xtreme XC
Hoosier Daddy!!!! Angola, IN
Joined: 05/14/2001
View Profile
Offline
|
Kooch, depends on how long you go. What size track and what length of stud are you going to use? That'll depend if you need some extra protection there or not.
http://www.cheersandgears.com/forums/index.php?showtopic=26267
|
YamaDooed
Upstream from the herd...
Joined: 09/03/2004
View Profile
|
Cooter I'd go wit Riggs ultimate selection of growser bars and cat claws... The rest of these wads are just try'n ta set ya up wit sub standard chit...
#1 supplier of Demongayde ski loops
|
2Fast4U2
McHenry, Illinois
Joined: 01/31/2007
View Profile
Offline
|
On 144" I used 152 studs with double square backers with 1/4 of them double angled backers. Notice the tunnel protectors.
Straight= stopping
Angled= accelleration
See the right way to install studs below......
"A word to the wise ain't necessary -- it's the stupid ones that need the advice."
 
|
YamaDooed
Upstream from the herd...
Joined: 09/03/2004
View Profile
|
YamaDooed wrote:Cooter I'd go wit Riggs ultimate selection of growser bars and cat claws... The rest of these wads are just try'n ta set ya up wit sub standard chit...
I rest my case...
|
Pol-Cat
riding a rental from da LTCM stable
Joined: 12/22/2003
View Profile
|
95 1.575" megabites on a 1.25" 144" traction is ideal. Plenty of bite ta skillie across a ice rink, not too many that ya can't have the sled freed up coming into the turn, and doesn't add so much rotating weight that a F6 goes by a poo 800 on top end
My vision is better then my hearing...shut up and show me something.
|
Kooch
St.Michael, MN
Joined: 10/19/2007
View Profile
Offline
|
2Fast4U2 wrote:On 144" I used 152 studs with double square backers with 1/4 of them double angled backers. Notice the tunnel protectors.
Straight= stopping
Angled= accelleration
See the right way to install studs below......
Yeah looks sweet Harold, but yur gay azz ride don't have the coolers right where you put the mo fo protectors. If I had yur money i'd be puttin in the double backers and all da fancy shizz.
I just got 140 used ones with square backers. I resharpened all the tips. some backers are a little tweaked. I would say they are 1 1/8 studs so they'll only stick out about .125, in which case to buddy's point i shouldn't need those handicapped track rubbin sum biches.
|
2Fast4U2
McHenry, Illinois
Joined: 01/31/2007
View Profile
Offline
|
Kooch wrote:
Yeah looks sweet Harold, but yur gay azz ride don't have the coolers right where you put the mo fo protectors. If I had yur money i'd be puttin in the double backers and all da fancy shizz.
I just got 140 used ones with square backers. I resharpened all the tips. some backers are a little tweaked. I would say they are 1 1/8 studs so they'll only stick out about .125, in which case to buddy's point i shouldn't need those handicapped track rubbin sum biches.
Hey "Retardo the Clown",
You said "yur gay azz ride don't have the coolers right where you put the mo fo protectors", what are you talking about? I didn't say anything about coolers? Are you confused and having one of your special gold star days where you didn't bang your head against the wall numerous times today?
|
