SnowHawg
Clarkston, MI
Joined: 11/22/2003
View Profile
|
Here's my set up 1.25 ripsaw with 144 1.40 SS studs
800 miles on this track
the track it replaced with 4000 miles
Second place just means you're the first loser.
'04 800 XCSP
'94 500 Indy Trail
|
Kooch
St.Michael, MN
Joined: 10/19/2007
View Profile
 Offline
|
Hey "Retardo the Clown",
You said "yur gay azz ride don't have the coolers right where you put the mo fo protectors", what are you talking about? I didn't say anything about coolers? Are you confused and having one of your special gold star days where you didn't bang your head against the wall numerous times today?
Like i said in my original post; where would i put the protectors if my coolers are over the windows? If i go inside there is less room for pattern. Deano, maybe you need to turn the angled studs backward for stopping from what i've seen. ( uuhuumm trailing arm meets hard object) It is an ideal set-up though. Gotta love the tall nuts. I trust yur knowledge.
|
Pol-Cat
riding a rental from da LTCM stable
Joined: 12/22/2003
View Profile
|
ZR900MAN wrote:Try putting some miles on yer leaf blower with enough power to exert some torqe in the set up, they will spin and pull out. Freind uses them doubles in his mxz700 with good results. Still like the round woodys. In orange.
Never had one come out of da oval sled this year, close to 1,000 miles on ice, dirt, and gravel. Still think your limpwristed and ain't getting enuff power on da tightening of da nuts, might want ta go wif da round pink backers ta match your round pink hole
My vision is better then my hearing...shut up and show me something.
|
2Fast4U2
McHenry, Illinois
Joined: 01/31/2007
View Profile
Offline
|
Kooch wrote:
Deano, maybe you need to turn the angled studs backward for stopping from what i've seen. ( uuhuumm trailing arm meets hard object) It is an ideal set-up though. Gotta love the tall nuts. I trust yur knowledge.
Funny-funny........................... 
Good eye on the tall nuts.................. you like to look at nuts?
Do not put any on the outside for what your doing!!!!!!! NONE!!! Only in the middle, and make sure there is not to much differance between 4 rows. You don't want heavy fluctuation at higher speeds, lotta mass to rotate.
Straight= stopping
Angled= accelleration
"A word to the wise ain't necessary -- it's the stupid ones that need the advice."
 
|
kenlacy
Foooore!
Joined: 10/25/2001
View Profile
|
Kooch wrote:Like i said in my original post; where would i put the protectors if my coolers are over the windows?
AS far as I know - protectors are made to only go inline with the windows. Protectors should not contact the lugs.
Beavis440_the_babblin_dem wrote:You, I can't take serious. You have nothing to offer. You're a hollow tree full of hot air.
me wrote:So what exactly is a solid tree full of cold air - like?
|
RIGGS1
WISCONSIN
Joined: 03/19/2003
View Profile
|
7, all on the left side.
|
mbenoy119
IWA World Headquarters
Joined: 01/17/2005
View Profile
Offline
|
Kooch wrote:2Fast4U2 wrote:On 144" I used 152 studs with double square backers with 1/4 of them double angled backers. Notice the tunnel protectors.
Straight= stopping
Angled= accelleration
See the right way to install studs below......
Yeah looks sweet Harold, but yur gay azz ride don't have the coolers right where you put the mo fo protectors. If I had yur money i'd be puttin in the double backers and all da fancy shizz.
I just got 140 used ones with square backers. I resharpened all the tips. some backers are a little tweaked. I would say they are 1 1/8 studs so they'll only stick out about .125, in which case to buddy's point i shouldn't need those handicapped track rubbin sum biches.
If they are only going to stick .125 over the track, don't waste your time installing them, they won't do chit
|
mbenoy119
IWA World Headquarters
Joined: 01/17/2005
View Profile
Offline
|
and....with Dean's 1.25 years of in depth sledding knowledge, I wouldn't hesitate to do it EXACTLY as he says. LMFAO! Clown!
|
2Fast4U2
McHenry, Illinois
Joined: 01/31/2007
View Profile
Offline
|
mbenoy119 wrote:and....with Dean's 1.25 years of in depth sledding knowledge, I wouldn't hesitate to do it EXACTLY as he says. LMFAO! Clown!
My studs are .375 above the lugs??
I might of had a little more sledding knowledge than 1.25 years, maybe 1.251246824 years?
If I'm a clown, then you're an azz-clown! I would rather just be a clown, because then I don't smell like shiz at the end of the day.
I know you are, but what am I?
I know you are, but what am I?
I know you are, but what am I?
I know you are, but what am I?
I know you are, but what am I?
I know you are, but what am I?
I know you are, but what am I?
|
YamaDooed
Upstream from the herd...
Joined: 09/03/2004
View Profile
|
HA mine are .376" above the lugs...
#1 supplier of Demongayde ski loops
|
